Icom HF Automatic Antenna Tuner AT-130 Coupler

Icom AT-130 HF Automatic Antenna Tuner

Tune in your HF marine world

Suitable for many vessels

The versatile AT-130 can be used with a variety of vessels, even smaller boats that cannot use a long antenna element.

For example, the AT-130 will match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 - 27.5 MHz range.

Automatic tuning

No manual tuning is needed.

Just push the [TUNE] switch on an Icom HF marine transceiver; the AT-130 adjusts the antenna and the transceiver to the minimum SWR in any frequency on an HF marine band.

The AT-130 allows you to transmit with strong RF output power, and is perfect for maritime mobile operations.

Weather resistant

The AT-130 is housed in a durable, completely weather-resistant acrylic case with rubber gaskets.

This allows it to be conveniently installed near the antenna element base.

For Icom HF marine transceivers

Icom's sophisticated AT-130 easily matches Icom HF marine transceivers.

The AT-130 easily interconnects with an Icom HF marine transceiver.

AT-130 installation is simple.

No adjustments are necessary.

Just connect the control cable and antenna wire and go!

Quick tune-up

Improved tuning performance...the tune-up time is less than 3 seconds in any frequency on an HF marine band.

In addition, the AT-130 has 8 convenient memories to store tuning information.

Retuning for a memorized frequency takes about 1.5 seconds.

This allows you quick trouble-free frequency changes.

Low power tune-up

The AT-130 emits very little output power (just 300 mW) during the tuning process.

This reduces the possibility of causing interference to other stations using the frequency.

Specifications

Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included)

Weight: 2.7 kg; 6.0 lb

Usable Temperature Range: -30C ~ +60C

Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver)

Current Drain (at 13.6 V DC): 2 A

Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer)

Input Impedance: 50 ohms (unbalanced)

Max. Input Power: 150 W (PEP)

Input Power During Tuning: 10 W

Auto Tuning Time: 1.5 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed)

Auto Tuning Accuracy: VSWR 2.0:1

Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)